GAP-DP2000 B 1600W

1. Class D and SMPS power modules; 
2. Built-in DSP processor, standard equipment with a 
USB To PC communication port and DANTE network 
interface, which can be
connected to a computer to set various parameters of 
the power amplifier; 
3. Processor parameters: 294.912MHz main frequency 
32-bitDSP processor, 96KHz sampling frequency 24
bitA/D and D/A conversion
96KHz 
4. TFT screen display: backlight 2x16 characteristic 
LCD display 
5. Maximum input level: +17dBu (5.5V) 
6. Gain: Adjustment range: +15dB, - 40dB, step 
distance is 0.1dB, delay Each input and output 
channel has a separate delay control, the adjustment 
range is 0-20ms, 
7. Balanced EQ: Each input and output channel can 
set a total of 31 equalizers, and the equalization 
methods are:PEQ/Lo-Shelf/Hi-Shelf 
8. Frequency divider: low pass filter (LPF), high 
pass filter (HPF), filter type (PF Mode) 
9. Limiter: start time: 10ms-3000ms, step distance: 
1ms; hold time: 0ms-3000ms, step distance: 1ms 
10. Release time: 10ms-3000ms, step distance: 1ms; 
11. Output power: 8Ω/500W×2, 4Ω/800W×2, 2Ω
/1100W×2; 8Ω bridge 1600W×1, 4Ω bridge 2200W×1 
12. Frequency response: 20Hz-20kHz (0-0.5dB); 
13. Power supply: 90V-265V/50Hz-60Hz; 
14. Damping coefficient: >600 
15. Total harmonic distortion: ≤0.05%; 
16. Sex-to-noise ratio: >104dB; 
17. Input impedance: balanced/unbalanced: 20kΩ/10k
Ω; 
18. Power amplifier protection function: DC, short 
circuit, over temperature, overload, power soft 
start; 
19. Size (W*L*H) 483*228*45MM; 
20. Weight: 4.7KG